How to Lace Polyester Mesh Belts for Connection

Polyester mesh belts are widely used in various industries, but their large width requires the use of interfaces to connect the belts. One of the most common ways to connect the mesh belts is lacing. This article will introduce the steps and tips for lacing mesh belt interfaces.

Step 1: Prepare the lacing material, which can be metal or plastic clips, or stainless steel wire.

Step 2: Cut the lacing material into suitable lengths according to the width of the mesh belt.

Step 3: Lay the two ends of the mesh belt flat, and overlap them by a certain amount. The overlap should be enough to ensure the strength of the connection.

Step 4: Thread the lacing material through the first row of holes on the two ends of the mesh belt, making sure that the lacing material passes through each hole.

Step 5: Continue lacing the mesh belt by threading the lacing material through the second row of holes, then the third row, and so on, until all the holes have been threaded.

Step 6: When the lacing material reaches the end of the mesh belt, tie a knot or use a clip to secure it.

Tips:

Choose a suitable lacing material according to the specific application requirements.

Ensure that the lacing material passes through each hole in order to achieve a tight connection.

Use pliers or a lacing tool to help thread the lacing material through the small holes.

By following these steps and tips, you can easily lace the interfaces of polyester mesh belts and ensure a strong and reliable connection.